Square Metal Tubing
Square Metal Tubing
video
Square Metal Tubing
square metal tubing2
square metal tubing3
square metal tubing4
1/2
<< /span>
>

Square Metal Tubing

Square Metal Tubing in a full range of sizes and grades, with stock lengths, cut-to-length service, third party inspection and mill test certificates on request. Send your size list and destination port for a quote within 12 hours.

A furniture workshop in Dubai ordered square metal tubing for a run of display shelving and rejected the second container. The sections were fine, but the surface had been left with rolling marks that showed through the powder coat, and the client had specified a finish that would be inspected at arm's length. Square tubing is made in several different ways and each route leaves a different surface, which matters more in furniture and display work than it does in a steel frame that will be buried in a wall. Here is how the tubing is produced, what we supply and what to think about first.

How square metal tubing is made

Square metal tubing is a steel tube with a square cross section, produced by hot rolling or cold rolling depending on the grade and the finish required. In practice most structural square tube starts as flat strip, which is formed into a round tube and welded along the seam before being shaped into the square section and cut to length. Cold rolling gives tighter dimensional control and a cleaner surface, which is why the thin wall material used in furniture and interior work is usually produced that way, while heavier sections destined for structural service come off the hot route. Knowing which you are being quoted matters, because the two do not look the same under a finish coat and they do not have the same wall tolerance.

Where square tubing is used

The construction industry takes the largest share, for steel structures, frames, staircases and guardrails. Machinery manufacturing follows, using square tube for equipment brackets, conveyor frames and machine guards where a closed section is stiff and easy to bolt. The furniture industry uses it for tables, chairs and shelving, where the neat square profile and light weight do most of the work. Display and decorative work, both indoor and outdoor, uses the same material for booth construction and fit out. Automotive use covers body frames and chassis components, where the closed section combines stiffness with low weight. These markets want different things from the same product, which is why the wall, the surface and the tolerance should all be named on the order.

square metal tubing bundles ready for fabrication

Grades, finishes and cost

Square tubing is supplied in the low and medium carbon grades that suit welding and forming, and in bare, oiled, painted or galvanised finishes depending on where the finished item will live. Cost performance is one of the reasons the section is so widely used: for a given stiffness the closed square profile needs less steel than a solid bar, so material, freight and handling all come down. Where the item will be painted or powder coated, tell us at the enquiry stage, because a smoother surface route costs slightly more up front and saves a finishing operation later. Where the item will be outdoors, galvanised is worth the extra over painted bare steel, since it protects the steel at every scratch rather than only where the coating is intact.

Fabrication and delivery checks

Square tubing cuts, drills and notches with ordinary shop tools and welds without special procedure in the low carbon grades. The closed profile traps no water and the flat faces take bolts and brackets directly. On delivery, check that the section is square across the corners rather than dished, and that the wall is even, since a thin patch shows up as a weld that blows through. We gauge wall and outside dimensions on a sample from each bundle before dispatch, and every bundle is tagged with its heat number and carries a mill certificate.

Questions buyers ask us

Hot rolled or cold rolled, which am I getting? Tell us the finish you need and we will quote the route that suits it. For painted and coated work the cold rolled surface is usually the better starting point.

Can you supply cut lengths? Yes, send the cut list and we will size before packing.

Is the wall tolerance the same on both routes? No, and that is one of the reasons to name the process. If the wall matters, say so and we will quote accordingly.

Can it be supplied galvanised for outdoor use? Yes, and we can also supply zinc rich touch up for site cuts.

square metal tubing surface and wall detail

Get a quote

Send the outside dimensions, wall thickness, length, grade, surface finish, quantity and destination port. We reply within 12 hours with per-tonne pricing, stock position and the earliest loading date we can hold. If the finish you have specified will not survive the fabrication you describe, we will raise it at the quotation stage rather than after the container has loaded.

Hot Tags: square metal tubing, square metal tubing price, square metal tubing supplier, buy square metal tubing, square metal tubing specification, square tube exporter, Rectangular Steel Tubing, Mild Steel Tube, 2 Inch Square Tubing, Square Metal Tubing, Square Tube, Black Steel Tube

Send Inquiry

(0/10)

clearall