Mild Steel Tube
Mild Steel Tube
video
Mild Steel Tube
mild steel tube2
mild steel tube3
mild steel tube4
mild steel tube5
1/2
<< /span>
>

Mild Steel Tube

Mild Steel Tube in a full range of sizes and grades, with stock lengths, cut-to-length service, third party inspection and mill test certificates on request. Send your size list and destination port for a quote within 12 hours.

A shelving manufacturer ordered 20 x 20 square tube at 2.0 mm wall and received 1.2 mm instead. The frames passed their own incoming check because the outside measured right, and the problem only surfaced when the first loaded bay bowed. Mild steel square tube comes in a wide set of section and wall combinations, and the wall that suits a fence panel is not the wall that suits a loaded rack, so the pairing has to be named on the order rather than left to whoever packs it. This page sets out what we supply and which wall goes with which section.

What mild steel means here

Mild steel is low carbon steel, which in practice means material that bends, cuts and welds without special procedure and does not harden when it is worked. That is exactly what you want in square tube, because most of it is fabricated rather than machined. The tube itself is made by taking steel strip, blanking and flattening it, curling it into a round tube and welding the seam before rolling the round into a square section and cutting to length. The finished product keeps a uniform wall all the way round and flat faces that take bolts and brackets directly, which is why it finds its way into everything from machinery guards to building frames and fluid line supports.

Which wall goes with which section

The pairing is worth knowing before you quote a job. A 20 x 20 or 25 x 25 section is supplied in wall from 1.2 mm to 2.75 mm, which suits light frames, furniture and fencing panels. Move up to 30 x 30, 20 x 40, 30 x 40 or 25 x 40 and the range widens to 1.2 mm through 3.5 mm, enough for shelving and light structural work. At 60 x 60, 50 x 70, 40 x 80 and 40 x 50 the wall runs from 1.2 mm to 5.75 mm. Sections of 70 x 70, 60 x 80, 50 x 80, 100 x 40 and 50 x 90 are supplied from 1.5 mm to 5.75 mm, and 100 x 100 and 120 x 80 from 1.8 mm to 7.75 mm. From 140 x 140 up through 150 x 150, 100 x 180 and 200 x 100 the wall starts at 2.5 mm and reaches 10 mm. Sections of 160 x 160, 180 x 180 and 200 x 150 run from 3.5 mm to 11 mm, as do 200 x 200, 250 x 150 and 100 x 250. The heavy end covers 250 x 250, 250 x 200, 300 x 150 and 300 x 200 at 4.5 mm to 15 mm, and 350 x 350, 350 x 300, 450 x 250, 400 x 300, 400 x 400, 280 x 280, 450 x 300 and 450 x 200 at 4.5 mm to 15.75 mm. Overall the thickness range we quote spans 0.6 mm to 20 mm.

mild steel square tube bundles sorted by section size

Standards and certification

Tube is supplied to EN, JIS, DIN, GB and ASTM as the order requires, with API, CE, JIS and ISO 9001 certification available. Mill certificates travel with the shipment and each bundle is tagged with its heat number. If your drawing names a standard, tell us which one the inspector will read, because a near equivalent is not the same thing in a rejection report. Where a job is destined for a regulated market, mention the certification requirement at the enquiry stage rather than at shipping, since some certificates take time to arrange.

Where mild steel tube goes

Machinery manufacture takes a large share, for guards, frames and supports. Building structures, staircases and handrails use the heavier sections, while furniture, shelving, display frames and fencing take the light wall material. Fluid line supports and general plant work use the middle of the range. The section sizes are easy to extrude and the profile holds its dimensions well, which is why the same product serves a workshop bench and a mezzanine floor with no more than a change of wall.

Questions buyers ask us

Can I mix sections in one container? Yes, mixed sections and walls load together and that is how most smaller orders ship. A single unusual size may carry a small extra charge until the next mill run.

Do you cut to length? Yes. Send the cut list and the tube arrives sized rather than being trimmed twice.

Is the wall tolerance the same across sizes? No, and the variation widens as the section grows. If the wall matters to your design, say so and we will quote the tighter option.

What payment terms do you work on? T/T or L/C at sight for first orders, with terms open to discussion once an order history is established.

mild steel tube cut ends showing wall thickness

Get a quote

Send the section size, wall thickness, length, grade, quantity and destination port. We come back within 12 hours with per-tonne pricing, what is in stock today and a loading date we can stand behind. If the wall you have specified is too light for the load you describe, we will raise it before the order is confirmed rather than after the frames have bowed.

Hot Tags: mild steel tube, mild steel tube price, mild steel tube supplier, buy mild steel tube, mild steel tube specification, square tube exporter, Black Steel Tube, 2 Inch Square Tubing, Rectangular Steel Tubing, Square Tube, Mild Steel Tube, Square Metal Tubing

Send Inquiry

(0/10)

clearall