0.14mm-0.6mm Galvalume Steel Coil
The coating of 0.14mm-0.6mm Galvalume Steel Coil contains 5% Al and 95% Zn, and also contains trace amounts of rare earth elements. Its main advantages are that the coating has good plasticity and strong adhesion, and the corrosion resistance remains unchanged before and after deformation.
Product Description
The coating of 0.14mm-0.6mm Galvalume Steel Coil contains 5% Al and 95% Zn, and also contains trace amounts of rare earth elements. Its main advantages are that the coating has good plasticity and strong adhesion, and the corrosion resistance remains unchanged before and after deformation. The corrosion resistance to atmospheric conditions is 2 to 3 times that of ordinary hot-dip galvanized sheets. The coating has good adhesion and good weldability. In galvanized sheets, its toughness and corrosion resistance are the best, and its formability can rival that of electro-galvanized sheets. This product is mainly used for corrosion resistance, weather resistance environments and as a substrate for coating materials.
application scope
- Buildings: roof, wall, garage, sound insulation wall, pipe, modular house, etc.
- Automobiles: muffler, exhaust pipe, windshield wiper parts, fuel tank, truck box, etc.
- Household appliances: refrigerator back panel, gas stove, air conditioner, electronic microwave oven, LCD frame, CRT explosion-proof tape, LED backlight, electrical cabinet, etc.
- Agricultural use: pig house, chicken house, grain warehouse, greenhouse pipe, etc.
- Other purposes: insulation cover, heat exchanger, dryer, water heater, etc.
Storage and Usage Notes
- Storage: 0.14mm - 0.6mm Galvalume Steel Coil should be stored in a warehouse or other indoor place, kept dry and well-ventilated. Do not leave it in an acidic environment for a long time. When stored outdoors, prevent rainwater from splashing in and avoid oxidation spots caused by condensation.
- Transportation: Avoid external force impact. Use SKID to support the steel coil on the vehicle, reduce stacking, and take measures to prevent rainwater from entering.
- Processing: When cutting and processing COILCENTER, use the same lubricating oil as for aluminum plates. When drilling or cutting galvanized steel plates, promptly remove the scattered iron filings.
Galvalume steel plate coating composition of the coating bath for the steel plate coating
|
Component |
Content (%) |
|
Aluminum |
54~59 |
|
Silicon |
0.9~2.3 |
|
Iron |
≤0.2 |
|
Copper |
≤0.015 |
|
Lead |
≤0.005 |
|
Calcium |
≤0.05 |
|
Tin |
≤0.01 |
|
Magnesium |
≤0.05 |
|
Nickel |
≤0.05 |
|
Zinc |
≤41~44 |
If you are interested in 0.14mm-0.6mm Galvalume Steel Coil, please feel free to contact us!
Hot Tags: 0.14mm-0.6mm galvalume steel coil, China 0.14mm-0.6mm galvalume steel coil manufacturers, suppliers, factory, Hot Dipped Galvanized Steel Coil, Steel Sheet in Coil, 0 14mm 0 6mm Galvalume Steel Coil, Coil Galvalume, Prepainted Galvalume Steel Coil, Galvalume Steel Coil
Send Inquiry
