
100×50mm H Beams
100×50mm H Beams in a full range of sizes and grades, with stock lengths, cut-to-length service, third party inspection and mill test certificates on request. Send your size list and destination port for a quote within 12 hours.
Ask an equipment-frame builder why he keeps ordering 100×50mm H Beams and the answer is boring in the best way: the section just fits. Machine bases, conveyor supports, mezzanine framing - the profile carries a stable load, installs with standard brackets, and wastes little material. Not every project needs a 600 mm column section; most industrial framing lives in the middle of the size chart, and that is exactly where this product sits.
Dimensional Accuracy From the Hot-Rolled Route
These are hot-rolled profiles produced to GB/T 11263 tolerance requirements, which keeps perpendicularity and straightness stable. For anyone who has assembled frames from badly rolled sections, that sentence is the whole sales pitch: straight beams butt together without shimming, and end-plate welds land square without rework. Stable perpendicularity and straightness reduce butt-joint errors - the small invisible quality that decides whether installation is a day or a week.
Material Strength You Can Design Against
The beam is made of Q235 or Q345 steel, with yield strength of 235–345 MPa, offering good weldability and resistance to deformation or brittleness. Q235 covers the general structural work; Q345 steps in when the frame carries heavier equipment or longer spans. Both grades weld with common consumables and standard procedures, which keeps fabrication shops happy and inspection reports short.
The Full Size Ladder Behind This Listing
100×50 sits inside a rolling program that covers the standard H-series families. HW wide-flange sections start at 100×100 and step through 125×125 and 150×150; HM middle-flange sections run from 150×100 up through 194×150 and 244×175; HN narrow-flange sections extend to 588×300 and 594×302. In practical terms: if your project mixes light framing with heavier primary members, the whole ladder is orderable from one supplier with one grade system, and mixed-size containers are normal business.
Anti-Corrosion Options
Black finish, powder coating and galvanizing are all available. Black (bare mill) suits indoor, painted-later work; powder coating handles indoor and sheltered outdoor environments with color requirements; galvanizing is the choice for high-humidity and industrial atmospheres where maintenance access is poor. The right answer depends on where the frame lives and who has to maintain it - tell us both and we will steer you honestly.
Where This Section Is Specified
Light industrial buildings, equipment frames and structural reinforcement are the three core uses. The section's high material utilization and convenient installation make it suitable for bulk project procurement and rapid construction - the kind of program where fifty containers of mixed steel arrive on a schedule and nothing can be the weak link.
What Frame Builders Usually Ask
Q235 or Q345 for a machine base? Q235 unless dynamic loads or long spans push the design - then Q345 earns its premium.
Do you supply to GB/T 11263 certificates? Yes, mill documentation accompanies delivery.
Can galvanizing follow cutting? Yes - cut to length first, then galvanize, so cut edges stay coated.
Mixed lengths per bundle? We bundle to your erection sequence when asked.
Sending the Inquiry
Section size, grade, lengths and tonnage get you a firm quote; add the environment and we will close the finishing question in the same reply. Stock sizes ship quickly, and for program buyers we can hold rolling schedules against your drawdown plan.
Hot Tags: 100×50mm h beams, 100×50mm h beams price, 100×50mm h beams supplier, buy 100×50mm h beams, 100×50mm h beams specification, h beams exporter, Construction H Beam Steel, 100 50mm H Beams, H Iron Beam 150x150, Galvanised Steel H Beam, Q235 H Beam Steel, H Beams
Send Inquiry










