Channel Steel Bar
Channel Steel Bar
video
Channel Steel Bar
Channel Steel Bar2
Channel Steel Bar3
Channel Steel Bar4
1/2
<< /span>
>

Channel Steel Bar

Channel Steel Bar in a full range of sizes and grades, with stock lengths, cut-to-length service, third party inspection and mill test certificates on request. Send your size list and destination port for a quote within 12 hours.

Channel steel has a golden rule that older fabricators repeat and younger ones learn the expensive way: the flange takes the force, so the channel stands up, not lies down. Laid flat, the section folds under a load it would shrug off standing. A racking builder we supply stamps the orientation into his shop drawings after a bay collapsed in the test rig - same steel, wrong attitude. Knowing how the C-section works is most of knowing how to buy it.

The section and how it is made

Channel steel bar is a long steel section with a grooved, C-shaped cross-section - a carbon structural steel for construction and machinery. In cold-formed production the family splits four ways: equal-sided and unequal-sided channel, and inner-curled and outer-curled channel. In the hot-rolled structural world the section is defined by depth, flange width and web thickness, and its behavior follows the flange: standing upright, the flanges resist the bending that beams and columns see in real frames.

Grades and standards across the board

channel steel bar C sections in warehouse

Supply is written against ASTM, AISI, JIS, GB, DIN and EN. The grade list covers the everyday structural range - Q235 and Q345, SS400, ST37-2 and ST52, S235JR, S275JR and S355JR - plus the higher-strength Q420 and Q460 where the design pushes hard. Base chemistry runs from Q195, Q235 and Q275 through the 10#, 15# and 20# carbon steels for mechanical work.

Production routes for different duties

Surface and technique are specified to the application: cold rolled for precise, clean-surfaced sections; hot rolled for structural work at volume; cold drawn where the section feeds machining and the dimensions must hold; hot forged for the heavy mechanical end. Length runs 2000 to 12000 mm or as required - long members for racking and frames are cut to schedule at the mill, which turns the section into fabrication input rather than yard stock.

Where channel earns its C

channel steel framework under construction

Building structures and curtain-wall engineering take the structural volume. Machinery and equipment manufacturing uses it for machine bases, guides and conveyor framing - the open section makes clamping and bolting natural. Vehicle manufacturing consumes steady tonnage for chassis members and body framework, where the C-section carries bending while leaving flat faces to attach to.

Delivery and dispatch checks

channel steel sections tagged for deliverychannel steel bar profile detail view

Delivery runs 15 to 20 days from confirmation. At dispatch, depth, flange and web are measured against the standard, straightness is checked over full length, and the surface is inspected for laps and scars. Bundles are strapped by size with grade tags outside, so receiving verifies the shipment on the ground, not on paper.

Questions from the design desk

Q235 or S355JR for a racking beam? The load case decides; the price difference is usually smaller than the redesign a wrong guess costs. Send the duty and we will name the grade.

Cold drawn or hot rolled for machined guides? Cold drawn - the dimensional hold is what your machining allowance is priced on.

Send the section list

Depth, flange, web, grade and total meters. We will confirm the production route - rolled, drawn or formed - quote the cut lengths, and put the flange-orientation note in the packing list, because the best steel still needs to stand the right way up.

Hot Tags: channel steel bar, channel steel bar price, channel steel bar supplier, buy channel steel bar, channel steel bar specification, channel steel exporter, U Shaped Channel Metal, Channel Steel Bar, Galvanised U Channel, Mild Steel U Channel, Metal U Channel with Holes, Channel Steel

Send Inquiry

(0/10)

clearall