
Color Coated Galvanized Steel Sheet
Color Coated Galvanized Steel Sheet in a full range of sizes and grades, with stock lengths, cut-to-length service, third party inspection and mill test certificates on request. Send your size list and destination port for a quote within 12 hours.
A tender document from a project buyer landed on our desk last quarter with one line underlined twice: the color coated galvanized steel sheet had to meet EN10346, not a near equivalent. That kind of requirement is common in project supply, and it is why the standards behind a sheet matter as much as the sheet itself.
Standards We Produce To
Production covers EN10346, JIS G3302, ASTM A653, AS 1397 and GB/T 2518. The grade list runs from forming grades Dx51D through DX57D, structural grades S220GD up to S550GD, and the JIS series SGHC, SGH340 to SGH540 plus SGCC, SGCH and SGCD1 to SGCD3. When an order names a standard, the mill certificate is issued against that standard so the paper trail matches the tender.
Size and Coating Range
Thickness runs from 0.12 mm to 6.0 mm, with the common project sizes 0.8, 1.0, 1.2, 1.5 and 2.0 mm always in production. Width spans 600 mm to 1800 mm, including 914, 1000, 1200, 1219, 1220 and 1524 mm. Zinc coating is offered from Z30 up to Z600 g per square meter, and the spangle can be zero, small, regular or big depending on appearance requirements.

Picking the Right Grade
For profiling and deep forming, Dx51D to DX53D are the usual choices. Where the sheet carries load - purlins, structural panels - the S220GD to S550GD structural series gives the yield strength the calculation needs. If the drawing only names a thickness and a standard, tell us the forming severity and we suggest the grade that bends without cracking.
What Gets Tested Before Shipment
Each lot is checked for coating mass, thickness tolerance, surface condition and coating adhesion. Sheets that pass go into export packing; anything outside tolerance is held back rather than blended into a good bundle.
Application Notes
The sheet is used for industrial panels, roofing, siding for painting, building envelopes, walls and external decorating materials. Corrosion resistance, paintability and workability from the zinc layer are the reasons specifiers keep it on their lists.

Questions from Buyers
Can you match a tender standard exactly? Yes - name EN10346, JIS G3302, ASTM A653, AS 1397 or GB/T 2518 and the certificate follows it.
Which zinc weight for a coastal site? Coastal work usually starts at Z275; we confirm against your exposure class.
Is 0.12 mm available in all widths? Thin gauges have width limits; send the target width and we confirm feasibility.
Sending an Inquiry
Include the standard, grade, thickness, width, zinc weight, spangle preference, quantity and port. A complete spec comes back with a firm price within one working day.
Hot Tags: color coated galvanized steel sheet, color coated galvanized steel sheet price, color coated galvanized steel sheet supplier, buy color coated galvanized steel sheet, color coated galvanized steel sheet specification, ppgl sheet exporter, Ppgi Steel Sheet, Color Coated Galvanized Sheet, PPGl Sheet, PPGl Sheet Color Coated, PPGl Sheet Plate, Color Coated Galvanized Steel Sheet
Send Inquiry












