SPCC Cold Rolled Steel Sheet in Coil
SPCC Cold Rolled Steel Sheet in Coil
video
SPCC Cold Rolled Steel Sheet in Coil
SPCC Cold Rolled Steel Sheet in Coil
SPCC Cold Rolled Steel Sheet in Coil
SPCC Cold Rolled Steel Sheet in Coil
1/2
<< /span>
>

SPCC Cold Rolled Steel Sheet in Coil

SPCC Cold Rolled Steel Sheet in Coil in a full range of sizes and grades, with stock lengths, cut-to-length service, third party inspection and mill test certificates on request. Send your size list and destination port for a quote within 12 hours.

Anyone who has run a cold rolled coil line knows the annealing schedule is the secret product. SPCC cold rolled steel sheet in coil comes off the rolling mill at room temperature - direct reduction of hot rolled strip to thickness, wound into coils by the winder - and that room-temperature work leaves internal stresses behind. Left unannealed, the coil springs and ages unpredictably; annealed properly, it presses, draws and coats the way appliance and automotive lines assume. The shiny, highly smooth surface cold rolling delivers is only half the story; the stress relief is the other half.

spcc cold rolled steel coil

Standards and Grades on the Program

Supply is documented to GB/T 5213, JIS G 3141, DIN 1623 and EN 10130, across materials including Q195, Q235, SPCC, SPCD, SPCE, DC01, DC02 and ST12. The letter-grade ladder is the practical part: SPCC is the standard commercial quality, SPCD steps into drawing quality, SPCE into deep drawing, and the DC/ST designations carry the same logic for DIN-referenced buyers. A buyer whose appliance line draws shells and whose bracket line only punches can order both qualities in one shipment and feed each line the right coil.

Dimensions That Fit Real Lines

Thickness runs 0.2 mm to 4.0 mm. Width spans 600 to 2000 mm, with 914, 1000, 1219, 1250 and 1500 mm as the standard widths the slitting and feeding world actually uses. Coil inside diameter comes in 508 mm or 610 mm to match uncoiler mandrels, and coil weight lands between 3 and 12 tons - heavy enough for line efficiency, light enough for standard coil cars. Specifying width to the millimeter and ID to your mandrel is the difference between a coil that loads and a coil that waits.

cold rolled coil line

Surface Finishes Available

General, bright, dull and mirror finishes are produced, oiled or non-oiled. Oiling protects the surface in transit and storage; non-oiled suits buyers who degrease immediately or coat in-house. The finish choice matters downstream more than buyers expect - bright surfaces telegraph every handling mark, dull finishes hide them and take paint uniformly. Tell us the next process and we will match the finish rather than defaulting.

coil surface finish options

Where the Coil Goes

Steel pipe production, packaging and coating sheet base are the named outlets. The coating-base role is the big one: galvanized, painted and laminated lines all start from cold rolled substrate, and substrate quality - surface cleanliness, thickness consistency, mechanical uniformity - is what the coating line's yield actually depends on.

coil packing for export

Lead Times, Stated Honestly

Standard shipment runs within 10–15 working days; quantities beyond 1000 tons take 25–30 days. Export standard packing, or per customer requirements, with coils eye-boarded and tagged by heat and specification. That documentation is what lets a coating line's incoming inspection sign off without re-testing every coil.

coil warehouse stock

Questions Coil Buyers Ask

SPCC or DC01 for my drawing? They are cousins across JIS and EN; send the drawing's standard and we certify the matching grade.

Oiled or non-oiled? Oiled for export transit unless your line degreases on receipt anyway.

Can width be slit to my feeder? Yes - slit-to-width is routine within the 600–2000 mm band.

What about mixed grades per container? Normal business, tagged by heat and grade.

Requesting a Quotation

Send grade, thickness, width, coil weight preference and destination port. If the coil feeds a coating or drawing line, mention it - the finish and quality-grade recommendations come free with the quote, and they usually save the buyer one trial order.

Hot Tags: spcc cold rolled steel sheet in coil, spcc cold rolled steel sheet in coil price, spcc cold rolled steel sheet in coil supplier, buy spcc cold rolled steel sheet in coil, spcc cold rolled steel sheet in coil specification, cold rolled steel coil exporter, Cold Rolled Steel Sheet in Coils, CRC Cold Rolled Steel Coil 0 6mm, Cold Rolled Carbon Steel Coil, Steel Cold Rolled Coil, SPCC Cold Rolled Steel Sheet in Coil, Cr Sheet Coil

Send Inquiry

(0/10)

clearall