Z275 Galvanized Steel Sheet
Z275 Galvanized Steel Sheet
video
Z275 Galvanized Steel Sheet
2
3
4
5
6
1/2
<< /span>
>

Z275 Galvanized Steel Sheet

Z275 Galvanized Steel Sheet in a full range of sizes and grades, with stock lengths, cut-to-length service, third party inspection and mill test certificates on request. Send your size list and destination port for a quote within 12 hours.

On the weighbridge at the port yard a Z275 bundle tells its own story: the coating mass certificate says 275 grams of zinc per square meter, double side, and the scale ticket backs the steel underneath. Z275 is the specification buyers reach for when the sheet will live outdoors, and getting that number right is the difference between a roof that ages quietly and one that rusts at the fixings.

What the Z275 Designation Means

The number is the total zinc coating mass on both faces. Production of this sheet spans Z30 to Z600 g per square meter, so Z275 sits in the upper-middle of the range - heavy enough for exposed roofing and cladding, without the cost of the heaviest coatings. The zinc bonds to the base through an iron-zinc layer, acting as a barrier and sacrificing itself first at scratches and cut edges.

Grades and Dimensions

Grade coverage runs Dx51D to DX54D, the structural series S220GD through S550GD, and the JIS list SGCC, SGHC, SGCH, SGH340 to SGH540, SGCD1 to SGCD3 plus SGC340, SGC490 and SGC570. Thickness runs 0.12 to 1.2 mm and width 30 to 1500 mm, so both narrow strip and full panels are available.

z275 galvanized steel sheet surface and edges

Surface Treatment Codes

Surface finishing follows the standard codes: passivation (C), oiling (O), lacquer sealing (L), phosphating (P) or untreated (U). Passivation is the default for storage and shipment; phosphating is chosen where the sheet goes straight to painting; oiling helps forming. Combining codes - passivated and oiled, for example - is normal on export orders.

How It Is Made and Checked

Cold rolled coil passes through a molten zinc bath in a continuous hot dip process, or receives its zinc by electrolytic deposition where a thinner even layer is specified. Each lot is verified for coating mass, thickness tolerance and coating adhesion before packing.

galvanized sheet coating inspection at production line

Buyer Questions

Is Z275 enough for a coastal roof? It is the common coastal specification; severe marine exposure may justify higher - tell us the site and we advise.

Can I order narrow strip at 30 mm? Yes, slitting to the low end of the width range is available.

Which surface code for post-painting? Phosphating (P) or passivation (C) - we match your paint line.

Requesting a Quote

Send grade, thickness, width, coating mass and surface code with quantity and port. A complete spec gets a firm answer within one working day.

Hot Tags: z275 galvanized steel sheet, z275 galvanized steel sheet price, z275 galvanized steel sheet supplier, buy z275 galvanized steel sheet, z275 galvanized steel sheet specification, galvanized steel sheet exporter, Zinc Coated Galvanized Steel Sheet, 1mm Gi Sheet, Electro Galvanized Steel Plate, Z275 Galvanized Steel Sheet, 1 5 mm Galvanised Steel Sheet, Galvanized Steel Plate

Send Inquiry

(0/10)

clearall