Sae 1006 Hot Rolled Coil
Sae 1006 Hot Rolled Coil
video
Sae 1006 Hot Rolled Coil
sae 1006 hot rolled coil 2
sae 1006 hot rolled coil 3
sae 1006 hot rolled coil 4
sae 1006 hot rolled coil 5
1/2
<< /span>
>

Sae 1006 Hot Rolled Coil

Sae 1006 Hot Rolled Coil in a full range of sizes and grades, with stock lengths, cut-to-length service, third party inspection and mill test certificates on request. Send your size list and destination port for a quote within 12 hours.

Every coil of SAE 1006 that leaves a hot strip mill carries a quiet promise: the grain structure inside was refined at over a thousand degrees and the defects of the cast ingot were rolled out of existence before the coil was wound. A stamping shop in our order book found out what happens when that promise is broken - a cheaper coil split on the first deep draw, and the die repair cost more than the steel saving. Hot rolled coil is not a commodity where all offers are equal, and SAE 1006 is the grade where the difference shows fastest.

What SAE 1006 brings to the coil

SAE 1006 is the low-carbon drawing grade that cold-reduction and wire-drawing plants feed on. Hot rolling suits it perfectly: at rolling temperature the metal deforms easily, so the mill breaks up the coarse as-cast grains and closes the porosity and micro-cracks left from casting. The result is dense, tough steel with good plasticity - it absorbs repeated deformation during the customer's own processing without tearing.

The rolling window

SAE 1006 hot rolled steel coil in warehouse

We supply SAE 1006 hot rolled coil in thicknesses from 0.8 mm to 16 mm and widths from 1000 mm to 2000 mm, in coil form or cut to length against your request. Tensile strength runs 400 to 550 MPa with hardness in the 120–180 HB band - numbers that suit drawing, bending and general forming rather than hardened wear parts.

Why hot rolling improves the steel itself

The process does more than change shape. Rolling at temperature refines the grain, destroys the cast structure and its defects, and makes the steel dense and mechanically sound. The improvement shows most strongly along the rolling direction, so the steel becomes somewhat directional - anisotropic rather than uniform. For stampers this is not a flaw, it is information: orient the blank so the rolling direction helps the draw, and scrap rates drop.

Standards and companion grades

hot rolled coil edge and surface detail

Supply is written against AISI, ASTM, DIN, JIS, BS or GB/T depending on where the project sits. The same mill covers the wider structural menu - Q195 through Q345, S235JR and S355JR, SS400, A36, E235 and E275 - so a buyer consolidating a bill of steel can put drawing coil and structural coil in one shipment. Cold-rolled grades such as SPCC, DC01 and DD13 are available for customers who take hot rolled stock as their feedstock and finish the surface themselves.

Checks before dispatch

Thickness is scanned across the strip width, the surface is walked for scale patches and laps, and chemistry is confirmed against the heat analysis. Coil weight, banding and edge condition are photographed before loading so any transit claim starts from evidence, not memory.

Common buyer questions

Can you hold thickness at the low end consistently? Yes - 0.8 mm is within the controlled range, and we publish the thickness scan with each shipment.

Is the coil pickled? As-rolled surface is standard; pickled and oiled is available on request for customers feeding cold mills or laser lines.

Send the drawing schedule

Tell us thickness, width, tonnage and what the coil feeds - drawing, tube, or re-rolling. The application decides whether as-rolled or pickled surface costs you less in the end, and we would rather price that correctly than win the inquiry with the wrong spec.

Hot Tags: sae 1006 hot rolled coil, sae 1006 hot rolled coil price, sae 1006 hot rolled coil supplier, buy sae 1006 hot rolled coil, sae 1006 hot rolled coil specification, hot rolled steel coil exporter, Hot Rolled Pickled Coil, Mild Steel Hot Rolled Coil, Hot Rolled Steel Coil, Sae 1006 Hot Rolled Coil, 0 4mm Hot Rolled Steel Coil, Steel Coil

Send Inquiry

(0/10)

clearall