
0.2mm Cold Rolled Steel Coil
0.2mm Cold Rolled Steel Coil in a full range of sizes and grades, with stock lengths, cut-to-length service, third party inspection and mill test certificates on request. Send your size list and destination port for a quote within 12 hours.
A five or six stand continuous mill rolls a 0.2 mm strip in one unbroken pass, which means the shape is set long before anyone can inspect it. By the time the coil reaches the coiler, the work roll profiles, the roll bending and the cooling pattern have already decided whether the strip will lie flat or carry a quarter buckle that only becomes obvious when the coil is unwound. Shape control systems and online thickness gauges exist precisely because this decision cannot be corrected downstream.

Pickling first, then rolling at room temperature
Cold rolled coil starts as hot rolled coil with an oxide scale that has to come off before anything else happens. The coil is pickled to remove that scale, then rolled at room temperature through multiple passes to bring the thickness down and improve the surface accuracy. The result is a thin specification product with no mill scale and a surface that is smooth enough to be sprayed or electroplated directly, without a grinding step in between. Downstream operations such as annealing, galvanising and colour coating can then be applied according to the end use.

Tolerances and surface worth planning around
Thickness tolerance on this product is held within ± 0.05 mm, which is what makes it suitable for precision machining and for progressive press tools that cannot absorb variation. The surface is described as an oxygen free skin with high smoothness. Those two properties are connected: a tight thickness band and a clean surface are what allow a customer to plan a coating line or a plating line without adding a conditioning stage of their own.
What cold work does to the metal
Rolling below the recrystallisation temperature hardens the steel. Strength and hardness rise, which is useful where a part has to hold its shape under load, and formability stays good enough for stamping and bending into complex shapes. Where the part will be deep drawn, the coil is annealed before delivery to bring ductility back, and a fair share of the material is recycled at the end of its life - cold rolled steel being one of the easier grades to return to the furnace. Thickness being fixed at 0.2 mm, the variables a buyer can still set are the coil inner diameter, the coil weight, and whether the material is supplied annealed or in the as-rolled condition; all three belong in the enquiry rather than in a follow-up message.

Applications and the grades used
Automotive covering parts - doors, hoods and similar panels - are commonly run from DC04 and DC06 cold rolled sheet, which offer the drawability those shapes need. Air conditioning panels and microwave oven shells take the same material and then receive a sprayed or coated finish. Curtain wall substrate and indoor partitions use it, and where the coil has been galvanised the rust proof service life extends beyond ten years in normal building exposure. In packaging, ultra-thin cold rolled steel between 0.15 mm and 0.5 mm goes into cans and steel packaging boxes. Send the thickness, the grade, the coil weight and the forming method, and we will confirm the annealing condition and the tolerance band along with the price.
Hot Tags: 0.2mm cold rolled steel coil, 0.2mm cold rolled steel coil price, 0.2mm cold rolled steel coil supplier, buy 0.2mm cold rolled steel coil, 0.2mm cold rolled steel coil specification, cold rolled steel coil exporter, CRC Cold Rolled Steel Coil 0 6mm, Cold Rolled Steel Sheet in Coils, Q235 Cold Rolled Carbon Steel Coil, Cold Rolled Steel Sheet in Coil, 0 2mm Cold Rolled Steel Coil, SPCC Cold Rolled Steel Sheet in Coil
Send Inquiry










