AZ26 700 Sheet Pile
AZ26 700 Sheet Pile
video
AZ26 700 Sheet Pile
2-2
3-3
4-4
5-5
6-6
1/2
<< /span>
>

AZ26 700 Sheet Pile

AZ26 700 Sheet Pile in a full range of sizes and grades, with stock lengths, cut-to-length service, third party inspection and mill test certificates on request. Send your size list and destination port for a quote within 12 hours.

The real test of a sheet pile is not the first drive. It is whether the wall comes back out of the ground in lengths worth keeping and goes in again somewhere else. A cofferdam gets driven, pumped out, used, pulled and driven a second time, and the section that survives that rotation with its lock intact earns its place on the hire fleet. AZ26-700 is a regular in that rotation.

AZ26 700 sheet pile sections stacked

What the section is

Production follows the ASTM standard with a plus or minus 1% tolerance, in hot rolled and cold formed routes, in U and Z shapes. The grade ladder runs S355 and S390 from the EN family alongside SY295 and SY390 from the Japanese sheet-pile designations, a range that matters when a design office and a piling contractor work to different national standards. Interlocking forms cover straight, grooved and Z profiles.

Getting it into hard ground

Driving into a hard layer is a strength problem before it is anything else: the section has to take the hammer without deforming the lock or buckling the web. AZ sections are proportioned for that, stiff enough for the driving energy and efficient enough in section modulus to carry the design moment of the wall. In deeper water the same section is used with inclined supports to form a cage where the ground demands bracing.

sheet pile interlock detail close up

Lock condition, waterproofing and reuse

The interlock is what makes the wall hold water, and the lock is also the part that takes wear. Sections driven once and pulled cleanly usually go back in with only a dressing pass; a section dragged out of a bent guide frame does not. We cut to length on CNC machines, so the pile arrives square-ended with a clean lock, and that condition is what gives a second and third deployment a chance.

Where these walls are built

Harbour and quay walls, cofferdams, bridge foundations, basement excavations and land reclamation. Port work buys this family the way a factory buys beams: continuously, in mixed lengths, against a driving schedule. Bundling is by section and length, packed for bulk vessel or container depending on the project's logistics.

One habit saves a driving day: run a short test length of lock engagement before the full wall starts. Two sections joined by hand tell you whether the lock is clean and whether the pair runs straight, and that check costs minutes against a jammed pair halfway through a wall.

Two questions come up on nearly every enquiry and both are worth settling early. U or Z, which depends on the moment and the soil rather than preference. And which grade, S355 or SY295, which follows the standard the design was written against rather than the supplier's convenience. Send the section, grade, lengths and tonnage with the destination port, and add a summary of the soil report if driving conditions are severe, because that is exactly when the section choice matters most.

Hot Tags: az26 700 sheet pile, az26 700 sheet pile price, az26 700 sheet pile supplier, buy az26 700 sheet pile, az26 700 sheet pile specification, sheet pile exporter, U Shape Sheet Pile, Sheet Pile, Hot Rolled Steel Sheet Pile, U Type Sheet Pile, Steel Sheet Pile Type 2, AZ26 700 Sheet Pile

Send Inquiry

(0/10)

clearall